This review systematically examines the structural characteristics, compositional design strategies, and recent research trends of layered double hydroxides (LDHs), which are recognized as promising electrocatalyst materials in electrochemical nitrate-to-ammonia conversion. Despite the rapid growth in related research, achieving simultaneous high selectivity and efficiency remains a significant technical challenge due to the complex mechanisms of the nitrate reduction reaction (NitRR) and its inherent competition with the hydrogen evolution reaction (HER). In this study, we analyzed the structural contributions of LDH catalysts for maximizing nitrate reduction efficiency and systematically established key catalyst design indicators required to ensure optimal performance. Specifically, we provide a detailed investigation of the physicochemical mechanisms for enhancing NH₃ production by precisely regulating the adsorption energies of reaction intermediates and maximizing charge transfer efficiency through compositional control and defect engineering. Furthermore, we discuss advanced structural design strategies, such as core-shell tandem structures, MOF-derived architectures, and interlayer anion control, as effective methods for enhancing catalytic performance and optimizing mass transport processes. These insights offer a strategic roadmap for designing high-performance LDH catalysts and represent a critical step toward the practical implementation of sustainable green ammonia production systems, particularly for integration into high-efficiency membrane electrode assembly (MEA) technologies.

This review introduces Corning’s Ribbon Ceramic process and the broader idea of ribbon ceramics―continuous, ultra-thin ceramic sheets made by tape or slot-die casting and fast, continuous sintering―covering key materials such as Al₂O₃, YSZ/ScSZ, PZT, LLZO, and LCO. Motivated by the need for scalable, energy-efficient ceramic components for electrification (green-hydrogen SOECs), next-generation Li-metal batteries, and compact piezo devices, we summarize capabilities and use cases using only publicly available information. Our main contribution is a clear platform view: continuous roll-to-roll conveyance with minutes-scale firing produces fully dense, fine-grained, high-purity ceramics at ~10-100 μm thickness with smooth native surfaces and controlled shapes, delivered as long rolls (up to ~300 ft), panels (~100 mm wide), or narrow strips (~0.5 mm). Illustrative results include 20-40 μm 3YSZ electrolytes for SOECs (high oxygen-ion conductance, ~1 GPa bend strength), LLZO garnet separators that cycle at 25℃ with interlayers, and free-standing LCO cathode ribbons tunable from dense to ~30% porous. For piezo acoustics, 60-80 μm PZT sheets (d33 ~300 pC/N) enable fine metallization and on-screen speakers, while fast firing reduces volatile loss and yields smaller grains. Together, these advances point to high-volume, lower-footprint manufacturing and faster adoption of novel ceramic membranes and substrates in SOEC/green-hydrogen systems, solid-state or hybrid lithium batteries, RF/power electronics, and piezo applications.

Electrochemical water splitting has emerged as a pivotal technology for green hydrogen production, offering a viable pathway toward a sustainable energy future. Among various electrolysis systems, Anion exchange membrane water electrolysis is particularly noteworthy as a cost-effective solution capable of operating under the fluctuating power inputs typical of renewable energy sources. However, the overall efficiency of water splitting is fundamentally limited by the oxygen evolution reaction, which exhibits sluggish kinetics compared to the hydrogen evolution reaction. While IrO₂ and RuO₂ serve as current benchmarks, their scarcity and high cost necessitate the development of earth-abundant alternatives. This review provides a comprehensive overview of fundamental OER mechanisms including the adsorbate evolution mechanism, lattice oxygen mechanism, and oxide path mechanism while highlighting how new pathways can circumvent traditional scaling relations. We discuss recent advancements in transition metal-based electrocatalysts, encompassing oxides, hydroxides, chalcogenides, phosphides, nitrides, and carbides, with a focus on innovative design strategies such as defect engineering, heteroatom doping, and heterostructure construction. This paper concludes by addressing current challenges and offering perspectives on future directions for the development of highly efficient and economically viable oxygen evolution electrocatalysts for large-scale applications.

Neuromorphic computing, which mimics the energy-efficient parallel processing capabilities of the human brain, has emerged as an alternative to traditional von Neumann architectures that struggle with high power consumption in the era of artificial intelligence (AI). Despite the potential of Si-based neuromorphic chips, they often face fundamental limitations in integration density and biological compatibility, necessitating the development of next-generation devices that can better emulate the ionic signaling of biological systems. This review provides a comprehensive analysis of the recent research trends in artificial synapses and neurons based on organic electrochemical transistors (OECTs), highlighting their unique ability to achieve high transconductance and mixed ionic-electronic conduction at ultra-low operating voltages. We discuss how OECTs successfully replicate diverse synaptic plasticities and complex neuronal spiking behaviors through advanced material engineering and structural optimizations such as vertical architectures. Furthermore, this review discusses the implementation of high-order neural functions, including associative learning and logic operations, which are facilitated by the inherent electrochemical dynamics of organic semiconductors. Finally, overcoming current challenges in reliability and scalability will establish OECTs as a pivotal platform for low-power neuromorphic hardware and bio-integrated electronics.

In advanced device technologies such as microelectromechanical systems (MEMS), nanoscale electronics, optoelectronic components, and piezoelectric devices, the demand for enhanced mechanical, electrical, and optical performance together with high reliability continues to grow. In response, a variety of functional thin-film materials have been developed; among them, Pb(Zr,Ti)O₃ (PZT) thin films with high piezoelectric coefficients have emerged as key materials for realizing highperformance sensors and actuators. However, residual stress within thin films can adversely affect device reliability, performance, and lifetime. This tutorial paper provides a practical and step-by-step guide to residual stress analysis using X-ray diffraction (XRD) based on the sin²φ method. As a representative case study, we quantitatively analyze the in-plane residual stress of a PZT thin film deposited on a flexible metal-foil substrate. Residual stress was evaluated using X-ray diffraction (XRD) in combination with the sin²φ method. The present analysis is expected to deepen understanding of residual-stress behavior in thin films and to inform stress-aware design and reliability optimization of PZT-based devices

This study investigates the effect of dielectric layer thickness on the electrical and reliability characteristics of BaTiO₃- based X8R multilayer ceramic capacitors (MLCCs) for automotive applications. MLCCs with 30 dielectric layers and thicknesses ranging from 5 to 30 μm were fabricated, and key parameters―including capacitance, equivalent series resistance (ESR), insulation resistance (IR), breakdown voltage (BDV), DC-bias characteristics, temperature coefficient of capacitance (TCC), and ripple current-induced heating―were evaluated. The dielectric constant (~2,000) and sintering shrinkage (~-25%) were nearly independent of thickness, confirming stable microstructure formation. ESR increased with thickness, while normalized BDV (V/μm) decreased due to defect accumulation. IR improved with increasing thickness but dropped sharply above 125℃. Dielectrics thinner than 10 μm exhibited significant capacitance degradation under DC-bias and temperature variation, reflecting strong internal field effects. Ripple-induced heating correlated directly with ESR. These results indicate that, although thinner layers enhance capacitance density, reducing the thickness below 10 μm compromises bias stability and thermal reliability. A minimum dielectric thickness of 10 μm is therefore recommended to achieve an optimal balance between electrical performance and durability in high-reliability X8R MLCCs.

The potential of replacing crosslinked polyethylene (XLPE) with an eco-friendly alternative, polypropylene (PP), as insulating material is investigated for overhead power distribution lines. Although XLPE exhibits excellent electrical and mechanical properties, the byproducts generated during crosslinking pose environmental challenges. PP is a viable alternative because of recyclability and absence of byproducts during crosslinking. This study evaluated alternating current (AC) breakdown strength, contact angle, and tracking resistance of two commercially available XLPE samples and three types of PP (PP1, PP2, PP3) with varying additive content. AC breakdown strength, analyzed using the Weibull distribution, facilitated relative comparison of insulation performance. PP2 exhibited scale parameters comparable to or exceeding those of XLPE. Contact angles exceeding 90° displayed hydrophobicity across all samples. To address pass/fail evaluation limitations, arcing images from tracking tests were analyzed using the box-counting method for fractal dimension analysis. Fractal dimensions increased with arcing extent, and complexity increased with test duration. Tracking resistance performance order was PP3, PP1, CC, PP2, OC which was attributed to enhanced heat dissipation properties of filler additives. The proposed quantitative method for comparing tracking resistance through fractal dimension analysis, explored the feasibility of using PP insulating materials in overhead power distribution lines.

Long lifetime, low power consumption, and environmental friendliness have enabled light-emitting diode (LED) lighting to rapidly replace conventional light sources such as incandescent and fluorescent lamps. In particular, AC-LED lighting systems can be directly powered by commercial alternating current (AC) sources; however, they suffer from significant luminance deviation caused by uneven current distribution among LED light-emitting modules. This paper proposes a lighting control method that improves flicker performance while maintaining lamp brightness and effectively reduces luminance deviation in AC-LED lighting. The proposed method reduces luminance deviation by controlling the lighting order of multiple LED light-emitting modules. Among four LED modules, only the required number of modules is continuously turned on, and the lighting priority alternates between rectification cycles. Specifically, during odd rectification cycles, LED modules are activated sequentially in ascending order (11→12→13→14), whereas during even rectification cycles, they are activated in descending order (14→13→12→11). By alternately applying continuous lighting control with opposite activation orders, the proposed reverse alternating lighting control method equalizes the current distribution among LED modules. As a result, luminance uniformity is improved, electrical stress concentration on specific modules is reduced, and the operational lifetime of the LED modules is extended compared with the conventional fixed-sequence lighting control method.

The recent rapid adoption of electric vehicles (EVs) is creating new load characteristics in the distribution system, and in particular, the widespread use of single-phase charging methods is exacerbating phase load imbalances, leading to voltage unbalance issues. Such voltage imbalances can undermine the stability of the distribution system and may cause side effects such as reduced power quality and shortened equipment lifespan. This study proposes a smart distribution panel system that can detect voltage imbalance issues caused by uneven electric vehicle charging loads in real time and actively compensate for them. The proposed system aims to contribute to the stability and power quality improvement of the distribution network by integrating a load balancing algorithm with inter-phase voltage monitoring functionality.

Bismuth layer-structured ferroelectrics with high Curie temperatures have recently attracted significant attention as promising candidates for high-temperature piezoelectric applications. However, the conventional solid-state reaction method entails high-temperature processing that induces bismuth volatilization, thereby degrading device reliability. In this study, we employed a co-precipitation method enabling atomic-level mixing to significantly lower the synthesis temperature of Nb/Tadoped Bi₄Ti₃O₁₂ ceramics compared to the solid-state reaction method. Experimental results demonstrated that the coprecipitation method yielded a pure single phase at 600℃ without intermediate phases. Furthermore, the synthesized nanopowders, with an average size of 100 nm, lowered the onset temperature of sintering shrinkage to 650℃, approximately 200℃ lower than that of the solid-state counterpart. The low-temperature synthesis process proposed in this work is expected to contribute to the performance enhancement of high-temperature piezoelectric devices by effectively suppressing bismuth volatilization and ensuring compositional stability.

The safety and stability concerns of liquid electrolytes in conventional lithium-ion batteries have accelerated the development of solid-state alternatives. NASICON type ceramics Li_1.5Al_0.5Ti_1.5(PO₄)₃ (LATP) offer promising properties, including high bulk ionic conductivity and good compatibility with lithium anodes. However, their practical application is hindered by grain boundary resistance and relatively low total ionic conductivity. This study investigates the effect of Ta₂O₅ doping on LATP to overcome these limitations. Doping with 5 wt% Ta₂O₅ improved the ionic conductivity to 2.95 × 10-4 S/cm by enhancing lattice structure, reducing grain boundary resistance, and suppressing the formation of secondary phase. Additionally, Ta₂O₅ positively influenced the sintering behavior, resulting in a denser, and more uniform microstructure. These enhancements suggest that Ta₂O₅-doped LATP is a strong candidate for next-generation all-solid-state lithium-ion batteries.

MoS₂ has attracted significant attention as a next-generation semiconductor material to overcome the physical scaling limits of silicon-based devices due to its atomic thinness and excellent electrical properties. However, high contact resistance and the formation of Schottky barriers resulting from interface defects during the metal deposition process remain major bottlenecks that degrade overall device performance and reliability. In this study, we fabricated MoS₂ FETs by employing Sb₂Te₃, van der Waals (vdW) contacts. Minimized interface inhomogeneity was achieved through a hemispherical stamp-based dry transfer of h-BN for device encapsulation. h-BN encapsulation decreased the hysteresis window in the ±25 V gate voltage range from 17 V to 11.5 V compared to un-capped devices, confirming that charge trapping phenomena induced by external environmental factors were suppressed. Consequently, the dry transfer technique of h-BN using a hemispherical stamp demonstrated in this study provides a potential solution for securing the long-term reliability of MoS₂ devices with vdW contact by minimizing interface contamination.