In this study, we fabricated plate-type shunt resistors with thermal stability by parallelly connecting metal alloy plates with positive temperature coefficient of resistance (TCR) and carbon nanotube (CNT) plates with negative TCR. The metal alloy plates, which were prepared by alloying Cu and Mn with a composition of 91 wt% of Cu and 9 wt% of Mn, showed around 800 ppm/℃ of TCR, and the CNT plates prepared from the CNT solution by using the vacuum filtration method showed around -800 ppm/℃ of TCR. The shunt resistor that was fabricated by stacking metal alloy plates and CNT plates in this work showed about 46.93 ppm/℃ of TCR. Therefore, we conclude that a shunt resistor with low TCR can be realized by simply adjusting the TCR of the metal alloy only, because the TCR of the CNT plate has an identical value.

In this paper, we discuss the fabrication of metal alloy resistors. We connected them in parallel to estimate their resistance and temperature coefficient of resistance (TCR). The fabricated resistors have different resistances, 5 and 10 Ω and different TCRs, 50 and 200 ppm/℃. Each resistor was confirmed to have the correct atomic composition through the use of energy dispersive X-ray (EDX). The resistors’ electrical properties were confirmed by measuring resistance and TCR. The resistance and TCR of the resistors connected in parallel were estimated through the increase in resistance due to the increase in temperature, and were compared with the measured values. We are confident that this TCR estimation technique, which uses the increase in resistance due to temperature, will be very useful in designing and fabricating resistors with low and stable TCR.