In this paper, We studied the change of surface and variation of elements on both electrodes of hydrogen generator of alkaline electrolysis in use of FE-SEM and SIMS. We used the stainless steel 316(6(X) p m) as electrode in condition of 25%KOH, 60℃ Temperature. The results show that the intensity of elements (C, Si, P. S. Ti, Cr, Mn, Fe, Ni, Mo) of Positive Electrode are decreased as much as about 101 than the original electrode. Thickness of Positive Electrode is decreased about 40 pin after chemical reaction. The negative electrode, however, shows a slight variation in the intensity of elements (C, Si, P. Fe, Ni, Mn, Mo) but Change of thickness and surface` shape of electrode show nothing after chemical reaction. The change in thickness and variation of Stainless Steel 316 cause the lifetime of electrode to be shorted. We also observed hydrogen. oxygen, potassium in both electrodes. Especially, The potassium is increased in proportional with depth of positive electrode. this means the concentration of alkali solutions is changed. and so we have to supply alkaline solution to generator in order to produce same quantity of hydrogen gas continuously, we hope that this study gives a foundation to develop the electrode for hydrogen generator of alkaline electrolysis.
