Skip to main navigation Skip to main content
  • KIEEME

J Electr Electron Mater : Journal of Electrical and Electronic Materials

OPEN ACCESS
ABOUT
BROWSE ARTICLES
EDITORIAL POLICIES
FOR CONTRIBUTORS

Articles

광원 및 응용기술 : 정전류다이오드를 이용한 COB 타입 LED 광원 및 조명기기 회로

박화진, 유순재, 박종민, 김윤제

Light Source and Application Technology : Regular Paper; Applications of Current Limiting Diode to chip on Board Type Light Source and Lighting Equipment Circuits

Hwa Jin Park, S J Yu, Jong Min Park, Y J Kim
J Electr Electron Mater 2013;26(6):488-492.
Published online: June 1, 2013
  • 6 Views
  • 0 Download
  • 0 Crossref
  • 0 Scopus
prev next

Current limiting diode (CLD) was fabricated using junction field effect transistor (JFET) structured two small cells and eight large cells. Two small cells and eight large cells were connected in parallel and the obtained constant current was 110 mA. The application of CLD in each of the parallel circuits on chip on board (COB) type LED lighting source, could significantly reduce the current deviation within the parallel circuits. The applications of CLD on AC power small lighting source, battery power low voltage parallel lighting source and AC flat lighting source were investigated.

Download Citation

Download a citation file in RIS format that can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and Reference Manager.

Format:

Include:

Light Source and Application Technology : Regular Paper; Applications of Current Limiting Diode to chip on Board Type Light Source and Lighting Equipment Circuits
J Electr Electron Mater. 2013;26(6):488-492.   Published online June 1, 2013
Download Citation

Download a citation file in RIS format that can be imported by all major citation management software, including EndNote, ProCite, RefWorks, and Reference Manager.

Format:
Include:
Light Source and Application Technology : Regular Paper; Applications of Current Limiting Diode to chip on Board Type Light Source and Lighting Equipment Circuits
J Electr Electron Mater. 2013;26(6):488-492.   Published online June 1, 2013
Close