Power Metal Oxide Semiconductor Field Effect Transistor`s (MOSFETs) are well known for superior switching speed, and they require very little gate drive power because of the insulated gate. In these respects, power MOSFETs approach the characteristics of an “ideal switch”. The main drawback is on-resistance RDS(on) and its strong positive temperature coefficient. While this process has been driven by market place competition with operating parameters determined by products, manufacturing technology innovations that have not necessarily followed such a consistent path have enabled it. This treatise briefly examines metal oxide semiconductor (MOS) device characteristics and elucidates important future issues which semiconductor technologists face as they attempt to continue the rate of progress to the identified terminus of the technology shrink path in about 2020. We could find at the electrical property as variation p base dose. Ultimately, its ON state voltage drop was enhanced also shrink chip size. To obtain an optimized parameter and design, we have simulated over 500 V Field ring using 8 Field rings. Field ring width was 3 ㎛ and P base dose was 1e15 ㎠. Also the numerical multiple 2.52 ㎠ was obtained which indicates the doping limit of the original device. We have simulated diffusion condition was split from 1,150℃ to 1,200℃. And then 1,150℃ diffusion time was best condition for break down voltage.
