K-PCS와 W-CDMA 듀얼 밴드 유전체 듀플랙스와 밴드패스 필터를 설계 및 제작하였다. 듀얼밴드 듀플렉스는 공통안테나 단자를 사용하여 각각의 모노블록 K-PCS와 W-CDMA 듀플렉스로 구성하였다. 커플링캐패시턴트와 입출력 임피던스 매칭은 두밴드 사이의 상호간섭을 최소화되도록 설계하였다. K-PCS와 W-CDMA 듀얼밴드의 Tx와 Rx단 교차점에서의 아이솔레이션은 47dB와 100dB를 각각 나타낸 반면에, Tx와 Rx단의 아이솔레이션은 66dB와 65dB를 나타내었다. 교차점에서의 아이솔레이션이 47dB와 100dB로 차이가 나는 이유는 K-PCS와 W-CDMA 밴드에서 Tx와 Rx의 중심주파수가 다르기 때문이다. 밴드대역의 커플링 커패시턴트, 입출력 매칭과 임피던스 매칭의 I/O 커패시턴트, 다양한 커패시턴트 등이 필터제작에 중요한 역할을 하였다.
The K-PCS and W-CDMA dual band dielectric duplexer and bandpass filters have been designed and fabricated. The dual band duplexer consists of the separate monoblock K-PCS and W-CDMA duplexers using common antenna port. The coupling capacitance and I/O impedance matching have been designed to minimize the cross interference between the bands. Isolations of crosspoint between Tx and Rx in K-PCS and W-CDMA dualband were about 47 dB and 100 dB, respectively. On the other hand, isolations of Tx and Rx in K-PCS and W-CDMA were about 66 dB and 65 dB, respectively. The difference between 47 dB and 100 dB originated from the different center frequencies in Tx and Rx of K-PCS and W-CDMA bands. The coupling capacitance of the bandwidth, I/O capacitance of I/O matching and impedance matching, and various capacitances were important role to fabricate the dielectric duplexer and bandpass filters.