Lead-free (Bi_1/2Na_1/2)TiO₃ (BNT)-based incipient piezoelectrics are highly promising for high strain actuators, but the high electric fields (4 ~ 6 kV/mm) required for activation limit practical device integration. In the current literature, large strains are frequently attributed to local structural variations like microscopic core-shell architectures. This work systematically investigates an alternative pathway by introducing A-site Strontium (Sr) excess non-stoichiometry into 0.74(Bi_1/2Na_1/2)TiO₃‒0.26SrTiO₃ (BNST26) ceramics. Microstructural and X-ray diffraction analyses reveal highly dense, uniform matrices completely devoid of micro-scale core-shell boundaries or macroscopic symmetry distortions, revealing that Sr non-stoichiometry diverges from typical Bi-excess mechanisms. Interestingly, despite negligible variations in overall macro-scale strain behavior across the composition series, a peak normalized strain (S_max/E_max) of approximately 804 pm/V is achieved at a low driving field of 2 kV/mm for the 1 mol% Sr-excess specimen (x = 0.010). These results indicate that while Sr non-stoichiometry weakly influences nanoscale stability, it can be inferred that subtle modifications of local defect configurations optimize switching energy barriers, enabling high-strain, low-drive-field performance in lead-free relaxors.

NTC (negative temperature coefficient) thermistors are semiconductor ceramics whose resistance decreases with increasing temperature, making them essential components in various temperature sensing applications. Typically, ceramic materials are sintered at high temperatures exceeding 1,150°C. However, in laminated devices incorporating internal electrodes, co-sintering can lead to cracking and mechanical failure due to mismatches in the thermal expansion coefficients between the ceramic layers and metal-based electrodes. Moreover, the use of noble metal electrodes increases production costs. To address these challenges, a low-temperature sintering approach is required. Previous studies have demonstrated that incorporating glass frit can reduce the sintering temperature of ceramics, although this often results in increased electrical resistance. In this study, NiMnCoO₄ (NMC) ceramics, as a representative NTC thermistor composition, were prepared with the addition of 10 wt% glass frit. To mitigate the resulting increase in resistivity, trace amounts (1 wt%) of various metal oxides, including CuO, ZnO, and MnO, were introduced. Among these, the addition of CuO notably decreased both the resistivity and B constant values. In contrast, MnO had little effect on resistivity, while ZnO led to an increase. With respect to the B25/85 constant, samples containing MnO and ZnO exhibited higher values than those without metal oxide additives. These findings indicate that the incorporation of 1 wt% CuO is effective in reducing the increased resistivity in NMC ceramics subjected to low-temperature sintering via glass frit addition.

NTC thermistors are essential components widely used for temperature sensing in various electronic sensor applications. However, conventional NTC thermistor ceramics typically require high sintering temperatures above 1150℃, necessitating the use of high-cost noble metal electrodes such as palladium (Pd) or platinum (Pt), which increases the overall manufacturing cost. In this study, low-melting-point oxides were successfully introduced as sintering aids to reduce the sintering temperature of NiMnCoO₄-based semiconducting ceramics. As the additive content increased, the B constant and average grain size exhibited an increasing trend, while the sample containing 5 wt% additives showed the lowest room-temperature resistivity. Furthermore, samples sintered at 1000℃ demonstrated slightly higher room-temperature resistivity and B constant values compared to those sintered at 1150℃. These results confirm that the addition of low-melting-point oxides is effective in lowering the sintering temperature of NiMnCoO₄ ceramics, suggesting the potential for reducing production costs and improving design flexibility in thermistor fabrication.

(Bi_1/2Na_1/2)TiO₃(BNT) piezoelectric ceramics are one of the promising materials that can replace Pb(Zr, Ti)O₃(PZT) piezoelectric ceramics due to the high electromechanical strain properties. However, it is still difficult to use practical applications because the required electric field for inducing electromechanical strain is relatively higher than that of PZT ceramics. To overcome this problem, it has been intensively studied on doping impurity or modifying other ABO₃ for BNTbased piezoelectric ceramics. Therefore, this study investigated the effects of La₂O₃ doping on the phase transition behavior and electromechanical strain properties in BNT-SrTiO₃ (BNT-ST) lead-free piezoelectric ceramics. In the case of the temperaturedependent dielectric properties, it was confirmed that a phase transition from ferroelectrics to relaxors is induced with increasing La₂O₃ content. As a result, the electromechanical strain properties of BNT-ST ceramics were improved. The highest Smax/Emax value corresponding to 300 pm/V was obtained at 2 mol% La₂O₃-dopped BNT-ST ceramics. Accordingly, this study successfully demonstrated that La₂O₃ doping is effective on the inducing phase transition from ferroelectrics to relaxors and the improving electromechanical strain properties of BNT-ST lead-free piezoelectric ceramics.

Citations

• Recent Progress in Relaxor-State Design of BNT-Based Ceramics for High-Efficiency Energy-Storage Capacitors
  Yeseul Lim, Geon-Tae Hwang
  Journal of Electrical and Electronic Materials.2026; 39(3): 225.     CrossRef

Piezoelectric ceramics play an important role in various electronic applications. However, traditional ceramics are difficult to be used in some complicated structures, due to their low flexibility and high brittleness. To solve this problem, this study prepared and investigated ceramic/polymer composites that can utilize a good flexibility of polymers. Polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE) and 0.77(Bi_1/2Na_1/2)TiO₃-0.23SrTiO₃ (BNST23) ceramics were selected to fabricate the composites. Ceramic/polymer composites were prepared using various volume fractions of BNST23 ceramics. The distribution of piezoceramic particles in BNST23/PVDF-TrFE composites was investigated using optical microscopy (OM) and scanning electron microscopy (SEM). The dielectric and piezoelectric properties of the composites were significantly influenced by the volume fraction of the piezoelectric ceramics. As a result, the highest piezoelectric constant (d33) of 56 pC/N was obtained in a composites with 70% volume fraction of BNST23 ceramics. Accordingly, it is expected that BNST23/PVDF-TrFE composites can be applied to various sensor applications.

We investigated the microstructure, crystal structure, dielectric, and elecromechanical strain properties of lead-free BaTiO₃ (BT)-modified (Bi_1/2Na_1/2)TiO₃-SrTiO₃ (BNT-ST) piezoelectric ceramics. Samples were prepared by a conventional ceramic processing route. Temperature dependent dielectric properties confirmed that a phase transition from a nonergodic relaxor to an ergodic relaxor was induced when the BT concentration reached 1.5 mol%, interestingly, where the average grain size reached a maximum value of 4.5 μm. At the same time, enhanced electromechanical strain (S_max/E_max = 600 pm/V) was obtained. It is suggested that the induced ferroelectric-relaxor phase transition by the BT modification is responsible for the enhancement of electromechanical strain in 1.5 mol% BT-modified BNT-ST ceramics.