Wearable temperature sensors are becoming increasingly important for continuous health monitoring, personalized healthcare, and biointegrated electronic systems. However, conventional temperature-sensing platforms often suffer from limited thermal sensitivity, insufficient mechanical compliance, and unstable performance under repeated deformation, making it difficult to detect subtle physiological temperature variations in real time. Here, this tutorial status report presents a fabrication strategy for highly sensitive wearable temperature sensors based on gold-doped crystalline silicon nanomembranes. Gold diffusion into crystalline silicon introduces deep-level impurity states that modulate the Fermi level and shift the freeze-out region toward the physiological temperature range, enabling an ultrahigh negative temperature coefficient of resistance. By integrating the gold-doped silicon nanomembrane with a polyimide-supported ultrathin platform, neutral mechanical plane design, and serpentine mesh interconnects, the resulting device can provide high thermal sensitivity, fast response, conformal skin attachment, and stable operation under mechanical deformation. This fabrication approach is expected to broaden the use of impurity-engineered silicon nanomembranes in next-generation wearable sensors, flexible bioelectronics, and multifunctional healthcare monitoring systems.

This review offers a critical overview of recent developments in lead-free piezoelectric materials and flexible device architectures for self-powered wearable and Internet of Things systems. It examines the scientific and technological rationale for replacing conventional battery-dependent power sources with ambient mechanical energy harvesters, and it evaluates the relative merits of inorganic ceramics, organic polymers, and composite systems in achieving efficient electromechanical conversion under practical operating conditions. The discussion further considers compositional tuning, phase boundary engineering, microstructural optimization, and device-level integration as key strategies for improving piezoelectric output, mechanical compliance, durability, and manufacturability. By connecting fundamental materials design with application-driven device requirements, the review identifies the principal challenges and emerging directions necessary for the realization of reliable, scalable, and sustainable electronic platforms.

The expansion of smart healthcare and wearable electronics has intensified the need for fabric-based sensors that integrate conformally with the human body for continuous bio signal monitoring. However, the heavy reliance of conventional devices on external batteries remains a major obstacle to commercialization, necessitating the development of flexible piezoelectric energy harvesters that convert biomechanical energy into sustainable power. Here, we present a highly flexible and wearable piezoelectric energy harvester (PEH) fabricated by a screen-printing of BaTiO₃ nanoparticlePDMS composites onto a fabric substrate. An optimized piezo-ceramic filler concentration of 70 wt% yielded a peak output voltage of 0.52 V and a current of 40 nA under the mechanical bending deformations. The fabricated PEH demonstrated exceptional mechanical and electrical stability, showing no performance degradation of over 5,000 repetitive bending cycles. These results indicate that a PEH can function as a stable self-powered source within complex clothing environments, offering a promising pathway for next-generation autonomous wearable sensor systems.

The rapid evolution of wearable technology has driven a surge in demand for sustainable, self-powered electronic devices. Flexible thermoelectric materials, capable of converting body heat into electricity, have emerged as a promising solution for powering next-generation wearables. This review comprehensively examines recent progress in organic (polymer-based) and hybrid thermoelectric materials, focusing on their design, fabrication, and integration into flexible architectures suitable for conformal contact with human skin. Key developments include advanced doping strategies, post-treatment techniques, and composite engineering, particularly in conductive polymers such as PEDOT: PSS and P3HT, which have significantly enhanced power factors and mechanical flexibility. Additionally, the integration of high-performance inorganic materials into stretchable systems has further elevated device efficiency and durability. The review highlights breakthroughs, ongoing challenges, and future opportunities in realizing practical, scalable, and high-efficiency wearable thermoelectric generators for sustainable energy harvesting applications.

Energy harvesting technology offers an innovative solution for providing self-sustaining power to wearable and implantable electronic devices. However, traditional energy harvesters face limitations in operating within electrolytic environments or at low motion speeds. To overcome these challenges, a mechano-electrochemical energy harvester using carbon nanotubes has been developed. This technology relies on electrochemical ion movement to induce changes in electrochemical double-layer capacitance, enabling operation within electrolytes and optimizing performance at low deformation speeds. This environmentally friendly and sustainable energy solution is expected to play a crucial role in the advancement of future smart systems and wearable technologies.

Flash lamp annealing (FLA) of metal nanoparticle (NP) ink has provided powerful strategies to fabricate highperformance electrodes on a flexible substrate because of its rapid processing capability (in milliseconds), low-temperature process, and compatibility with to roll-to-roll process. However, metal NPs [e.g., gold (Au), silver (Ag), copper (Cu), etc.] have limitations such as difficulty in synthesizing fine metal NPs (diameter less than 10 nm), high price, and degradation during ink storage and FLA processing. In this regard, organometallic ink has been proposed as a material that can replace metal NPs due to their low-cost (usually 1/100 times cheaper than metal nano inks), low-temperature processability, and high material stability. Despite these advantages, the fabrication of flexible electrodes through FLA treatment of organometallic compounds has not been extensively researched. In this paper, we experimentally guide how to determine the optimal conditions for forming electrodes on flexible substrates by considering material parameters, and flashlight processing parameters (energy density, pulse duration, etc) to minimize the difficulties that may arise during the FLA of organometallic ink.

Flexible fiber- or yarn-based one-dimensional (1-D) energy storage devices are essential for developing wearable electronics and have thus attracted considerable attention in various fields including ubiquitous healthcare (U-healthcare) systems and textile platforms. 1-D supercapacitors (SCs), in particular, are recognized as one of the most promising candidates to power wearable electronics due to their unique energy storage and high adaptability for the human body. They can be woven into textiles or effectively designed into diverse architectures for practical use in day-to-day life. This review summarizes recent important development and advances in fiber-based supercapacitors, concerning the active materials, fiber configuration, and applications. Active materials intended to enhance energy storage capability including carbon nanomaterials, metal oxides, and conductive polymers, are first discussed. With their loading methods for fiber electrodes, a summary of the four main types of fiber SCs (e.g., coil, supercoil, buckle, and hybrid structures) is then provided, followed by demonstrations of some practical applications including wearability and power supplies. Finally, the current challenges and perspectives in this field are made for future works.

A triboelectric nanogenerator (TENG) is a device that converts mechanical energy into electrical energy, and has been considered as a substitute for continuous power supply due to its high performance, simple structure and eco-friendliness. Recently, it is important to develop a TENG using a non-toxic material in order to use it as a power source for wearable, attachable, and body-embeddable electronics. Here, we developed a human friendly TENG using polyvinyl chloride (PVC) gel containing acetyl tributyl citrate (ATBC), a non-toxic plasticizer. PVC gels were fabricated using various ratios of PVC and ATBC, and optimized by investigating dielectric properties, surface potential, output performance, and durability. The PVC gel based TENG generates output signals of 73 V and 4.3 μA, i.e., a 5-fold enhancement in the output power compared to pristine PVC-based TENG. In addition, the PVC gel can be stretched over 500% of strain. This study is expected to be helpful in the future development of non-toxic wearable TENG.

Laser-induced plasmonic sintering of metal nanoparticles (NPs) is a promising technology to fabricate flexible conducting electrodes, since it provides instantaneous, simple, and scalable manufacturing strategies without requiring costly facilities and complex processes. However, the metal NPs are quite expensive because complicated synthesis procedures are needed to achieve long-term reliability with regard to chemical deterioration and NP aggregation. Herein, we report laser-induced Ag NP self-generation and sequential sintering process based on low-cost Ag organometallic material for demonstrating highquality microelectrodes. Upon the irradiation of laser with 532 nm wavelength, pre-baked Ag organometallic film coated on a transparent polyimide substrate was transformed into a high-performance Ag conductor (resistivity of 2.2 × 10^-4 Ω·cm). To verify the practical usefulness of the technology, we successfully demonstrated a wearable transparent heater by using Ag-mesh transparent electrodes, which exhibited a high transmittance of 80% and low sheet resistance of 7 Ω/square.

Recent advancement of Internet of Things (IoT) and energy harvesting technology enable realization of flexible thermoelectric energy harvester (f-TEH), with technological prowess for use in biomedical monitoring system integrated applications. To expand a flexible thermoelectric energy harvesting platform, the f-TEH must be required for optimized flexible thermoelectric materials and device structure. In response to these demands related to thermoelectric energy harvesting, many research groups have investigated various f-TEHs applied as a power source for wearable electronics. As a key member of the f-TEH, film-based f-TEHs possess significant applicability in research to realize self-powered wearable electronics, owing to their excellent flexibility, low thermal conductivity, and convenient fabrication process. Thus, based on the rapid growth of thermoelectric film technology, this review aims to overview comprehensively the f-TEH made of various inorganic/organic thermoelectric materials including developed fabrication methods, high thermoelectric performance, and wide-range applications.

With the advent of the IoT (internet of things) era, there has been discussion on how to efficiently use various information from daily life. In academic and industrial society, various smart devices such as smart watches, smart phones, and smart glasses have been developed and commercialized for narrowing the physical/psychological distance with user information. According to recent developments of smart devices, the contemporary people have desired to check their body information and treat disease by themselves. According to the needs of the time, biological researches by phototherapy/monitoring have been actively conducted. Among various light sources, microLEDs have been spotlighted due to their superior optoelectric properties and stability. In this paper, we would like to review the state-of-the research results on the next-generation biological therapy devices via microLEDs.

Atmospheric environmental problems have a major impact on human health and lifestyle. In humans, inhalation of nitrogen oxides causes respiratory diseases, such as bronchitis. In this paper, thermal analysis of a gas sensor was carried out to design and fabricate a wearable nylon-yarn gas sensor for the detection of NO_x gas. In the thermal analysis method, the thermal diffusion process was analyzed while operating the sensors at 40 and 60℃ to secure a temperature range that does not cause thermal runaway due to temperature in the operating environment. Thermal diffusion analysis was performed using the COMSOL software. The thermal analysis results could be useful for analyzing gas adsorption and desorption, as well as the design of gas sensors. The thermal energy diffusion rate increased slightly from 10.05 to 10.1 K/mm as the sensor temperature increased from 40 to 60℃. It was concluded that the sensor could be operated in this temperature range without thermal breakdown.

In this study, we produced a light, flexible, wearable gas sensor by depositing MWCNTs (Multi-walled Carbon Nanotubes) into nylon. MWCNTs are widely used as a gas sensor material due to their excellent mechanical, electrical and physical characteristics. We produced a gas sensor to detect NOx gases by depositing nylon yarn in a MWCNT solution. The MWCNT solution was made by mixing 3 mg MWCNT in 5 ml of ethanol. Nylon yarn was placed in the manufactured solution and ultrasonic waves were applied using an ultrasonicator for 3 h, resulting in MCWNT deposition. The MWCNT-deposited nylon yarn was dried at room temperature for 24 h. The MWCNT-thin-film-coated nylon yarn was masked 1 mm apart, and gold was then deposited on the masked nylon yarn to create the gas sensor. The sensor then was installed in a chamber with a controlled atmospheric environment and exposed to NOx gas. The changing signal from the sensor was amplified to analyze its gas detection characteristics.

Among the various physiological information that could be obtained from human body, heartbeat rate is a commonly used vital sign in the clinical milieu. Photoplethysography (PPG) sensor is incorporated into many wearable healthcare devices because of its advantages such as simplicity of hardware structure and low-cost. However, healthcare device employing PPG sensor has been issued in susceptibility of light and motion artifact. In this paper, to develop the real-time heart rate measurement device that is less sensitive to the external noises, we have fabricated an ultra-small wireless LC resonant pressure sensor by MEMS process. After performance evaluation in linearity and repeatability of the MEMS pressure sensor, heartbeat waveform and rate on radial artery were obtained by using resonant frequency-pressure conversion method. The measured data using the proposed heartbeat rate measurement system was validated by comparing it with the data of an commercialized heart rate measurement device. Result of the proposed device was agreed well to that of the commercialized device. The obtained real time heartbeat wave and rate were displayed on personal mobile system by bluetooth communication.