The increasing global demand for renewable energy has accelerated the deployment of offshore wind farms, thereby highlighting the need for advanced development and performance assessment techniques for dynamic submarine cables used in floating offshore wind systems. These cables are continuously subjected to combined thermal, electrical, and mechanical stresses, with mechanical loading playing a particularly dominant role. As a result, dynamic submarine cables exhibit degradation behaviors that differ significantly from those of conventional fixed submarine cables. This paper presents the design and implementation of a comprehensive evaluation system capable of applying combined thermal, electrical, and mechanical stresses to dynamic submarine cables. The system was validated using a 66 kV wet type submarine cable through commissioning tests and insulation performance measurements. Electrical stress of 72 kV, thermal stress exceeding 95°C, and mechanical stress corresponding to a bending radius of 20 times the cable diameter over 20 cycles were applied to verify system reliability. The subsequent insulation assessments quantitatively confirmed performance variations induced by the combined stresses. The results demonstrate that the proposed platform is the first system capable of simultaneously applying thermal, electrical, and mechanical stresses to dynamic submarine cables, and its operational performance has been successfully validated. This platform enables realistic reliability evaluation of dynamic cables used in floating offshore wind farms and is expected to improve the overall operational reliability of offshore wind power systems.

Demand and necessity for eco-friendly offshore wind farms have been increasing. Research on submarine cables is constantly being considered for a reliable and stable power transmission. This study aimed to evaluate the thermal aging characteristic of submarine cables inside the J-tube of offshore wind farms. In this study, a submarine cable was set in three sections: The first is the part exposed to the air above the sea level at high temperature. The second is the section exposed to repeated temperature fluctuation as the sea level rises and falls. The third is the part submerged at low temperature below the sea level. Aged samples were tested by using the method of electrical evaluation to obtain insulation characteristics. The experimental results show that the dielectric breakdown of the sample with temperature fluctuation was 7% lower than the sample with a constant temperature; thereby, demonstrating that the section where the temperature fluctuation occurred in the submarine cables was weaker than the other. The sections of submarine cable with temperature fluctuations are believed as a weak point during operation; therefore, this part should be monitored preferentially.