Ocean waves are not only a sustainable renewable energy source but also provide valuable information for monitoring marine environments and natural hazards. In this study, we developed a CNT/SEBS-based self-powered marine monitoring sensor utilizing a mechano-electrochemical mechanism, enabling simultaneous ultralow-frequency wave sensing and electrical energy harvesting. The developed sensor generated an open-circuit voltage of up to 60 mV and a short-circuit current of 80 μA/cm2 without an external power source by exploiting variations in electrical double-layer capacitance induced by changes in the electrode–electrolyte interface. The capacitance increased from 0.1 μF to 2.4 μF with increasing immersion area, demonstrating the effectiveness of the proposed sensing mechanism. Furthermore, the CNT/SEBS bilayer exhibited high electrical conductivity together with excellent stretchability and flexibility, maintaining stable electrical responses under repeated water-level fluctuations. The proposed mechano-electrochemical self-powered sensor provides a promising platform for next-generation autonomous marine monitoring systems and sustainable blue-energy harvesting technologies.
This review offers a critical overview of recent developments in lead-free piezoelectric materials and flexible device architectures for self-powered wearable and Internet of Things systems. It examines the scientific and technological rationale for replacing conventional battery-dependent power sources with ambient mechanical energy harvesters, and it evaluates the relative merits of inorganic ceramics, organic polymers, and composite systems in achieving efficient electromechanical conversion under practical operating conditions. The discussion further considers compositional tuning, phase boundary engineering, microstructural optimization, and device-level integration as key strategies for improving piezoelectric output, mechanical compliance, durability, and manufacturability. By connecting fundamental materials design with application-driven device requirements, the review identifies the principal challenges and emerging directions necessary for the realization of reliable, scalable, and sustainable electronic platforms.
The continuous and long-lasting monitoring of physiological signals induced from the human body is crucial for health monitoring, disease diagnosis, and treatment. In this study, we have reported the Seebeck effect-based flexible selfpowered temperature sensor which can convert the electric signals from lateral temperature difference. For demonstrating temperature sensor arrays, the p-type thermoelectric (TE) composite films were fabricated by dispersing the Bi0.5Sb1.5Te3 (BST) powders inside poly-vinylidene fluoride matrix and subsequently attached to the patterned electrode foils. The inorganic BST powders-embedded TE composite films with activated area of 0.5 × 1 cm² harvest a maximum voltage of 1.7 mV, a maximum current of 5.6 mA, and an output power of 2.6 nW from the temperature gradient (ΔT) of 20 K. Finally, the fabricated selfpowered temperature sensor array well detected the pattern images of external thermal source of ΔT = 20 K. This study manifests flexible temperature sensor array which paves the way for further advancements in this field.
Energy harvesting technology offers an innovative solution for providing self-sustaining power to wearable and implantable electronic devices. However, traditional energy harvesters face limitations in operating within electrolytic environments or at low motion speeds. To overcome these challenges, a mechano-electrochemical energy harvester using carbon nanotubes has been developed. This technology relies on electrochemical ion movement to induce changes in electrochemical double-layer capacitance, enabling operation within electrolytes and optimizing performance at low deformation speeds. This environmentally friendly and sustainable energy solution is expected to play a crucial role in the advancement of future smart systems and wearable technologies.
Citations
Citations to this article as recorded by
Fabrication and performance of integrated self-powered PAAM hydrogel flexible pressure sensors Huaikuan Zang, Chao Hu, Pan Niu, Yong Zhang Materials Science in Semiconductor Processing.2026; 214: 110899. CrossRef
Piezoionic sensor devices of integrated gradient electrolyte gels Yi Fang, Hongbing Li, Taeuk Eom, Chang Kyu Jeong, Yong Zhang Chemical Engineering Journal.2026; 540: 177542. CrossRef
Covalent Interfacial Anchoring of 1D‐2D Hybrid Nanofillers to Poly(Vinyl Alcohol) Networks Enables High‐Strength, High‐Stiffness Hydrogel Fibers Dong Yeop Lee, Ji Hwan Moon, Hocheol Gwac, Gyu Hyeon Song, Hyunsoo Kim, Yongwoo Jang, Changsoon Choi, Seon Jeong Kim Advanced Materials.2026;[Epub] CrossRef
The search for sustainable and efficient energy conversion technologies is becoming increasingly critical in response to global energy and environmental challenges. Traditional lead-based piezoelectric materials, such as lead zirconate titanate (PZT), have high piezoelectric constant but present significant health problems and environmental risks due to their hazardous metal contaminants. This study addresses these concerns by investigating barium titanate (BTO), a lead-free alternative, and enhancing its performance using anisotropic nanowires (NWs) structures. BTO NWs were synthesized via a two-step hydrothermal method and incorporated into a poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] matrix to fabricate a piezoelectric composite film. The resulting device demonstrated a notable increase in electrical output compared to devices based on isotropic morphology of BTO nanoparticles, exhibiting enhanced performance. These findings suggest that BTO NWs hold significant promise for applications in flexible and wearable electronics, paving the way for further advancements in sustainable energy technology.
Citations
Citations to this article as recorded by
Interphase engineering in carbon black–reinforced piezoelectric nanocomposites: A combined experimental and micromechanical modeling study Ziwen Zhao, Masoumeh Khamehchi, Mohammad J. Mahmoodi, Zhenjin Wang, Fumio Narita Materials & Design.2026; 268: 116391. CrossRef
MXene-reinforced ultrasensitive piezoelectric pressure sensors based on P(VDF-TrFE) nanofibers with hybrid nanofillers Jingyi Yang, Jianqiao Wang, Zike Guo, Shuai Liu, Yaohua Dong, Peng Zhou, Tianjin Zhang, Yajun Qi Journal of Alloys and Compounds.2026; 1079: 189867. CrossRef
Layer-engineered BNBT–polymer films for multifunctional applications M. Vijatovic Petrovic, A. Dzunuzovic, J. Bobic, Z. Despotovic, F. Cordero, E. Mercadelli, Z. Radovanovic, F. Craciun Journal of Alloys and Compounds.2026; 1079: 189972. CrossRef
Piezoionic sensor devices of integrated gradient electrolyte gels Yi Fang, Hongbing Li, Taeuk Eom, Chang Kyu Jeong, Yong Zhang Chemical Engineering Journal.2026; 540: 177542. CrossRef
Interfacial polarization triggered by low-k fillers boosts piezoelectricity of MMT/PT composites for intelligent health monitoring Yong Ao, Junjun Yuan, Wenqi Yu, Rui Yuan, Boling Lan, Shenglong Wang, Tingting Zhou, Guicen Liu, Wei Zhao, Zhiyuan Gao, Xiaofei Jiang, Weili Deng, Long Jin, Weiqing Yang Journal of Materials Chemistry A.2026;[Epub] CrossRef
Interfacial Engineering
of Composite Piezoelectric
Fibers Via an Anchor-Chain Architecture Jun Liu, Qiao Zhou, Pengcheng Zhang, Shuying Hu, Fang Zhou, Shuangshuang Ren, Ting Guo, Leiying Miao ACS Applied Engineering
Materials.2026; 4(8): 4367. CrossRef
The Internet of Things (IoT) device is a key component for Industry 4.0, which is the network in homes, factories, buildings, and infrastructures to monitor and control the systems. To demonstrate the IoT network, batteries are widely utilized as power sources, and the batteries inevitably require repeated replacement due to their limited capacity. Magneto-mechanoelectric (MME) generators are one of the candidate to develop self-powered IoT systems since MME generators can harvest electricity from stray alternating current (AC) magnetic fields arising from electric power cables. Herein, we report a magnetomechano- triboelectric generator enabled by a ferromagnetic-ferroelectric composite. In the triboelectric nylon matrix, a ferromagnetic carbonyl iron powder (CIP) was introduced to induce magnetic force near the AC magnetic field for MME harvesting. Additionally, a ferroelectric ceramic powder was also added to the MME composite material to enhance the chargetrapping capability during triboelectric harvesting. The final ferromagnetic-ferroelectric composite-based MME triboelectric harvester can generate an open-circuit voltage and a short-circuit current of 110 V and 8 μA, respectively, which were enough to turn on a light emitting diode (LED) and charge a capacitor. These results verify the feasibility of the MME triboelectric generator for not only harvesting electricity from an AC magnetic field but also for various self-powered IoT applications.
Citations
Citations to this article as recorded by
Enhanced magneto-mechano-electric conversion with an arc-shaped piezoelectric cantilever for wireless sensor networks Xu Liu, Jingen Wu, Xianfeng Liang, Xuan Sun, Xin He, Yiwei Xu, Yang Lu, Dengfeng Ju, Zhongqiang Hu, Ming Liu Chemical Engineering Journal.2026; 543: 178357. CrossRef
The internet of things (IoT) technology is a key component for the advent of 4th industrial revolution, which is the network of home appliances, infrastructures, and vehicles to remotely investigate these systems. For the operation of compact IoT devices, batteries are widely used as electric power, and the limited lifetime of batteries inevitably leads to periodic replacement. Magneto-mechano-electric (MME) generators may be alternatives to batteries inside the IoT devices by converting stray magnetic field into electric energy, since we are always surrounded by ambient alternating current (AC) magnetic fields induced from electric power transmission lines everywhere. This article reviews the recent domestic research progress in high-performance MME generators and their application field for IoT and electronic devices.
Citations
Citations to this article as recorded by
Magneto-mechano-electric energy harvesting for sustainable IoT and next-generation electronics: Materials strategies, device engineering, and challenges Deepak Rajaram Patil, Atul Thakre, Mengdi Fu, Muhammad Waheed, Chang Min Lee, Hyun Jae Lee, Geon Lee, Sagar M. Mane, Seung Yoon Ryu Sensors and Actuators A: Physical.2026; 411: 118476. CrossRef
Among several types of energy saving smart window technologies, the leader, the dynamic EC (electrochromic) window one needs integrated PV (photovoltaics), to minimize expensive electrical wiring as well as to obviate the need for external energy. Self-powered smart windows were reviewed according to PV types used. DSSCs (dye sensitized solar cells) were found to be compatible with EC cells, to have several categories of next generation smart windows such as PECCs (photoelectrochromic cells), PVCCs (photovoltachromic cells), EC polymer PECCs. In addition silicon solar cells and third generation solar cells were investigated. They are summarized in a table showing their advantages and disadvantages respectively for a fast comparison. The strategy to expedite the commercialization of these next generation smart windows includes developing retrofit smart window coverings for use on flexible polymer substrates adhered to the inside surface of a window and easily replaced after use for upto 10 years.
First
Prev
