Ultrasonic sensor is suitable as a next-generation autonomous driving assist device because its lower price compared to that of other sensors and its sensing stability in the external environment. Although Pb(Zr, Ti)O₃ (PZT)-relaxor ferroelectric system has excellent piezoelectric properties, the change in capacitance is large in the daily operating temperature range due to the low phase transition temperature. Recently, many studies have been conducted to improve the temperature stability of ferroelectric ceramics by controlling the grain size and crystal structure, so it is necessary to study the effect of the grain size on the piezoelectric properties and the temperature stability of PZT-relaxor ferroelectric system. In this study, the piezoelectric properties, phase transition temperature, and temperature coefficient of capacitance (TCC) of 0.9 Pb(Zr_1-xTi_x)O₃-0.1 Pb(Zn_1/3Nb_2/3)O₃ (PZT_x-PZN) ceramics with various grain sizes were investigated. PZT_x-PZN ceramics with larger grain size showed higher piezoelectric properties and temperature stability, and are expected to be suitable for ultrasonic devices in the future.

The piezoelectric properties of 0.65Pb(Zr_1-xTi_x)O₃-0.35Pb(Zn_1/6Ni_1/6Nb_2/3)O₃ (PZT_x-PZNN) ceramics with 0.530≤ x≤0.555 were investigated for application to piezoelectric energy harvesters. Although a morphotropic phase boundary (MPB) was found at approximately x＝0.545, the ceramic with the highest figure of merit (FOM) (d₃₃×g₃₃) was observed at a composition of x＝0.540. Values of this figure of merit, d₃₃×g₃₃, of 19.6 pm²/N and 20.2 pm²/N were obtained from PZT_0.540-PZNN ceramics sintered at 920℃ and 950℃, respectively. A high output power of 937 μW and a high power density of 3.3 mW/cm³ were obtained from unimorph-type piezoelectric energy harvesters fabricated using PZT_0.540-PZNN ceramic sintered at 920℃ for 4h.