Department of Electric Materials Engineering, Kwangwoon University, Seoul 01897, Korea (Received June 13, 2024; Revised July 8, 2024; Accepted July 10, 2024) Abstract: Wide bandgap (WBG) devices, especially SiC, are gaining traction as materials for high-power EV conversion devices due to their superior efficiency and switching capabilities compared to Si-based power devices. SiC allows for high power, high temperature, and high frequency applications because of its outstanding thermal conductivity, saturation velocity, and dielectric breakdown field. SiC-based MPS diodes combine the advantages of SiC-based SBDs and PiN diodes, allowing high-frequency switching operation with low leakage currents under high voltage conditions. However, MPS diodes exhibit snapback phenomena influenced by the P⁺ region’s size, necessitating optimization. A TCAD simulation studied the impact of the P+ region’s depth and width on MPS diode performance. Increasing the P⁺ width raised the On-specific resistance (R_on,sp) and lowered the maximum voltage during snapback (V_snap). Increasing the depth decreased both Breakdown voltage (BV) and V_snap. A trade-off between the semiconductor performance index BFOM and V_snap was identified, leading to optimized dimensions. The optimized MPS diode shows a low V_snap of about 3.89 V and a high BFOM of 1.72 GW·㎠, highlighting its potential as a next-generation high-performance power conversion device.

In this study, we measured and comparatively analyzed the characteristics of MPS (Merged Pin Schottky) diodes in 4H-SiC by changing the areal ratio between the Schottky and PN junction region. Increasing the temperature from 298 K to 473 K resulted in the threshold voltage shifting from 0.8 V to 0.5 V. A wider Schottky region indicates a lower on-resistance and a faster turn-on. The effective barrier height was smaller for a wider Schottky region. Additionally, the depletion layer became smaller under the influence of the reduced effective barrier height. The wider Schottky region resulted in the ideality factor being reduced from 1.37 to 1.01, which is closer to an ideal device. The leakage saturation current increased with the widening Schottky region, resulting in a 1.38 times to 2.09 times larger leakage current.