Cathodoluminescence (CL) spectroscopy provides valuable insights into the optical and electronic properties of materials by analyzing photon emission induced by electron beam excitation. In this study, we present a novel CL detection system integrated into a transmission electron microscope (TEM) specimen stage, enabling high-resolution optical analysis of internal microstructures. The system features a parabolic mirror, a focusing lens, and a UV-VIS range optical fiber to maximize light collection and transmission efficiency, with performance further enhanced by a liquid nitrogen cooling setup. Using this system, we successfully performed CL mapping of InGaN/GaN multiple quantum wells (MQWs) and GaN thin films. The results revealed that threading dislocations act as non-radiative centers in GaN and locally increase the bandgap energy in InGaN MQWs, causing a blue-shift in CL emission. These findings support a model in which dislocations induce carrier delocalization, preserving high radiative efficiency despite high dislocation densities. This work demonstrates the effectiveness of the TEM-integrated CL system for nanoscale optical characterization, offering a new pathway for studying defect-related phenomena in semiconductor materials.

Micro-LEDs show lower efficiencies compared to general LEDs having large areas. Simulations were carried out using ray-tracing software to investigate the change in light extraction efficiency and light distribution according to chip-size of blue flip-chip micro-LEDs (FC μ-LEDs). After fixing the height of the square FC μ-LED chip at 158 μm, the length of one side was varied, with dimensions of 2, 5, 10, 30, 50, 100, 300, and 500 μm. The highest light-extraction efficiency was obtained at 10 μm, beyond which the efficiency decreased as the chip-size increased. The chip size-dependence of the FC μ-LEDs both without the patterned sapphire substrate, as well as vertical FC μ-LEDs, were analyzed.

The humans are under attack involving the hazardous environment and pathogen/biotoxin aerosol that is realistic concerned. A portable, fast, reliable, and cheap Pathogen and Biotoxin Aerosol threat Detection(PBAD) trigger is an important technology for detect-to-protect and detect-to-treat system because the man-made biological terror is a fast and lethal infection. The ultraviolet C(UVC) wavelengths light source is key issue for PBAD that is sensitive because of strong fluorescence cross section from fluorescent amino acids in proteins such as tryptophan and tyrosine. The UVC-light emitting diode(LED) is emerging light source technology as alternative to laser or lamps as they offer several advantages. This paper discussed about the design consideration of UVC-LED for the PBAD system. The UVC-LED and PBAD technology, currently available or in development, are also discussed.

A new information society of late has arrived by the rapid development of various information & communications technologies. Accordingly, mobile devices which are light and thin, easy and convenient to carry on the market. Also, the requirements for the larger television sets such as fast response speed, low-cost electric power, wider visual angle display are sufficiently satisfied. The currently most widely studied display material, the Organic Light-emitting Diodes(OLEDs) overwhelms the Liquid Crystal Display(LCD), the main occupier of the market. This new material features a response speed of more than a thousand times faster, no need of backlight, a low driving voltage, and no limit of view angle. And the OLEDs has high luminance efficiency and excellent durability and environment resistance, quite different from the inorganic LED light source. The OLEDs with simple device structure and easy produce can be manufactured in various shapes such as a point light source, a linear light source, a surface light source. This will surely dominate the market for the next generation lighting and display device. The new display utilizes not the glass substrate but the plastic one, resulting in the thin and flexible substrate that can be curved and flattened out as needed. In this paper, OLEDs device was produced by changing thickness of Teflon-AF of hole injection material layer. And as for the electrical properties, the four layer device of ITO/TPD/Alq3/BCP/LiF/Al and the five layer device of ITO/Teflon AF/TPD/Alq3/BCP/Lif/Al were studied experimentally.

The interest in development on luminaires which are available up to -52℃ is surging as demands in vessels navigating a north pole route increase. A conventional incandescent lamp used invessels is operated stably at -52℃, but many countries including Korea have eliminated the use of incandescent lamps gradually because of its low luminous efficacy. In this paper, therefore, to develop the LED luminaires with high-efficiency, long lifetime that enables to substitute for incandescent lamp, it has studied about cryogenic characteristics of LED packages, bulbs, driving circuit and power supply. This experiments were carried out according to standards IEC 60945-8.4.1. Temperature range is from -60℃ to25℃, and the light output depending on ambient temperature. It showed that, based on 25℃, light output of a CFL decreased by 80% of CFL at -20℃ while each increased 12% of LED bulbs and 16∼19% of LED packages at -60℃.

Light can be divided into ultraviolet rays, visible rays, and infrared rays depending on the wavelengths. Visible rays with specific wavelength are those predominantly used for would treatment. Especially low level laser irradiates into cells, effectively stimulating cellular tissues and activating cellular function. This study was intended to verify the effect of white LED irradiation therapy on wound recovery in animal tests by applying white LED irradiator, which was independently designed and developed to emit beams of similar wavelength to that of a laser. The designed LED Irradiator was used to find out how white LED light source affected the skin wound of SD-Rat(Sprague-Dawley Rat). We divided the participants into two groups; white LED irradiation group which was irradiated 1 hour a day for 9 consecutive days, and none irradiation group. The results showed that the study group had lower incidence of inflammation and faster recovery, compared with the control group.

In this research a ring light was developed so that a partial shadowless shooting for the patient`s affected area at the medical treatment room and surgical operation room using high luminance light emitting diode (LED) for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area. And at the time of design of ring light, the characteristics of LED and the loss of light at the time of penetrating light diffusion PC were considered so that intensity of illumination for over 150 lx can be obtained. The result of measurement of the intensity of illumination of the ring light that was developed revealed that maximum intensity of illumination of 225.7 lx was obtained, while smoke index was measured to be maximum 78 Ra in the case of Red(50%) Green(100%) and Blue LED(60%). We could confirm that response speed was also very fast as 1.72 ms.