Humidity monitoring of exhaled breath has emerged as a vital approach for noninvasive respiratory health assessment, underscoring the need for sensitive and reliable humidity sensors. Despite its high conductivity and hydrophilic functional groups, reduced graphene oxide (rGO) often undergoes irreversible moisture adsorption and gradual oxidation by residual water, resulting in sensitivity degradation and long-term instability during cycling. In this study, a montmorillonite/reduced graphene oxide (MMT/rGO) composite is developed as a room-temperature humidity-sensing material, exhibiting an optimized response of 115%, more than 14 times higher than that of pristine rGO. This superior performance originates from the synergistic interaction between the reversible MMT swelling and the conductive rGO network near the electrical percolation transition, which ensures excellent stability and repeatability under repeated humidity cycles. These findings suggest that the MMT/rGO composite provides a cost-effective and biocompatible platform for next-generation wearable humidity sensors capable of continuous respiratory monitoring.

A pressure sensor is a device that converts an applied physical pressure into an electrical signal. Such sensors have a range of applications depending on the pressure level, from low to high pressure. Sensors that use physical pressure, when compared to those operating under air pressure, are not widely applied as they are inefficient. To solve this problem, graphene oxide, which exhibits good mechanical and electrical characteristics, was used to increase the efficiency of these pressure sensors. Graphene oxide has properties that control the movement of charges within the dielectric. Exploiting these properties, we evaluated the change in electrical characteristics when pressure was applied according to the ratio and thickness of the oxidation graph added to the pressure sensor.

The power law is very important in gas sensing for the determination of gas concentration. In this study, the resistance of a gas sensor based on poly (3, 4-ethylenedioxythiophene) polystyrene sulfonate＋graphene oxide composite was found to exhibit a power law dependence on hydrogen concentration at 150℃. Experiments were carried out in the gas concentration range of 30~180 ppm at which the sensor showed a sensitivity of 6~9% with a response and recovery time of 30s.

Recently, there has been an increasing interest in the use of graphene as electrode materials for supercapacitors. In this regard, graphene oxide (GO) films were prepared using GO slurry obtained by dispersing GO powder in deionized (DI) water. The degree of dispersion of GO powder in DI water depends on the concentration of GO slurry, pH, impurity content, GO particle size, types of functional groups contained in GO, and manufacturing method of GO powder. In this study, the dispersivity of the GO powder was improved by adjusting the pH using only DI water (without additives), and a uniform GO film was obtained. The GO film was reduced by exposure to xenon intense pulsed light for a few milliseconds, and the reduced GO film was used as electrodes of a supercapacitor. The supercapacitor was characterized using cyclic voltammetry (CV), charge-discharge cycle, and electrochemical impedance spectroscopy measurements, and the specific capacitance of the supercapacitor was found to be ~140 F/g from the CV data.