Smart windows capable of dynamically controlling light transmission are gaining increasing attention as a means of reducing building energy consumption while improving indoor comfort. However, indium tin oxide (ITO), the most widely used transparent electrode in such devices, suffers from poor mechanical flexibility due to its intrinsic brittleness, limiting its use in curved or flexible window applications. Here, we demonstrate a flexible ITO/DPP hybrid transparent electrode, fabricated by depositing a dimethyl sulfoxide (DMSO)-doped PEDOT:PSS (DPP) layer on ITO, that achieves markedly improved bending durability while maintaining electro-optical performance comparable to bare ITO. The hybrid electrode with an optimized DPP thickness of 120 nm exhibited a sheet resistance of 23.3 Ω/sq., about 20% lower than that of ITO (29 Ω/sq.), while maintaining comparable visible-range transmittance. A polymer-dispersed liquid crystal (PDLC) device fabricated with this electrode showed only a slight decline in driving voltage and transmittance relative to ITO. Notably, its resistance change under repeated bending at a curvature radius of 30 mm was only 25.1%, less than half that of ITO (51.6%). These results suggest that the ITO/DPP hybrid electrode is a promising candidate for transparent electrodes in curved and flexible smart windows and other flexible optoelectronic devices.

Flash lamp annealing (FLA) of metal nanoparticle (NP) ink has provided powerful strategies to fabricate highperformance electrodes on a flexible substrate because of its rapid processing capability (in milliseconds), low-temperature process, and compatibility with to roll-to-roll process. However, metal NPs [e.g., gold (Au), silver (Ag), copper (Cu), etc.] have limitations such as difficulty in synthesizing fine metal NPs (diameter less than 10 nm), high price, and degradation during ink storage and FLA processing. In this regard, organometallic ink has been proposed as a material that can replace metal NPs due to their low-cost (usually 1/100 times cheaper than metal nano inks), low-temperature processability, and high material stability. Despite these advantages, the fabrication of flexible electrodes through FLA treatment of organometallic compounds has not been extensively researched. In this paper, we experimentally guide how to determine the optimal conditions for forming electrodes on flexible substrates by considering material parameters, and flashlight processing parameters (energy density, pulse duration, etc) to minimize the difficulties that may arise during the FLA of organometallic ink.

In this study, the sterilization property of E. coli was established using a plasma generator with a flexible electrode structure. The bacterial suspension was prepared based on the McFarland standard 0.50 (1.5×10⁸ CFU/mL) concentration and a specific amount was inoculated on the plate medium. After the plasma was discharged 3 cm away from the plasma generator in the range of 30s to 5 min and the results compared to the control group, the observed colonies that were formed decreased significantly as the plasma discharge time increased.