Cellulose nanofiber (CNF) has attracted significant attention as a next-generation insulating material due to its ecofriendly nature and outstanding functionalities. However, conventional kraft insulation paper suffers from limited dielectric breakdown strength and long-term reliability under high-voltage conditions, highlighting the need for alternative materials. In this study, kraft pulp was combined with five types of CNFs (A, B, C: wood-based / D, E: non-wood-based) to fabricate composite insulation papers, and their electrical and mechanical properties were systematically evaluated. The results showed that CNF incorporation generally enhanced density and tensile strength, while certain types contributed to lowering dielectric constant and improving breakdown strength. Among the wood-based CNFs, type C exhibited the most balanced performance in terms of dielectric stability and mechanical reinforcement. Among the non-wood-based CNFs, type E demonstrated notable improvements in structural compactness and tensile strength, suggesting favorable reliability. Therefore, this study identifies CNF C among wood-based types and CNF E among non-wood-based types as the most promising candidates for insulation performance enhancement, suggesting their applicability as next-generation insulating materials for power equipment and ecofriendly electronic devices.

Carbon nanotubes (CNTs) have excellent electrical, chemical stability, mechanical and thermal properties. In this paper, networks of Multi-walled carbon nanotube (MWCNT) materials were investigated as a resistive gas sensors for the H2 gas detection. Sensor films were fabricated by the air spray method using the multi-walled CNTs dispersion solution on the glass substrates cured with plasma and nitrocellulose. Sensors were characterized by the resistance measurements in the self-fabricated oven in order to find the optimum detection properties for the hydrogen gas molecular. The sensitivity and the linearity of the MWVNT sensors using the glass substrate cured with plasma for the H2 gas concentration of 0.06∼0.6 ppm are 0.013∼0.097%/sec and 0.131∼0.959%FS, respectively. The MWCNT film was excellent in the response for the hydrogen gas moleculars and its reaction speed was very fast, which could be using as hydrogen gas sensor. The resistance of the fabricated sensors decreases when the sensors are exposed to H2 gas.

Carbon nanotubes (CNTs) have been significantly used for the field emitters for display applications. However, the lifetime of CNT emitters which are formed by screen printing technique is not guaranteed yet, because the constituents in CNT paste affect the lifetime of CNTs. The CNT pastes for screen printing are normally composed of organic vehicles (nitro cellulose, ethyl cellulose, etc) and additives (glass frits, indium tin oxide (ITO), etc) with CNTs. In this study, the effects of constituents in CNT pastes on the lifetime and emission characteristics of CNTs were investigated by thermal and electrical analysis. Use of glass frits worsened the lifetime and electron emission of CNTs. However, an addition of ITO to CNT paste rather improved the lifetime of CNTs. Degradation of CNTs was small when nitro cellulose was used in CNT paste as an organic vehicle.

Citations

• Improved Field Emission Properties of Carbon Nanotube Paste Emitters Using an Electrically Conductive Graphite Binder
  Hanbin Go, Si Eun Han, Hyunjea Lee, Cheol Jin Lee
  ACS Applied Electronic Materials.2024; 6(5): 3554.     CrossRef
• Enhancement of Photoelectrochemical Performance of Ag@ZnO Nanowires: Experiment and Mechanism
  Yu Cai, Chengbao Yao, Jie Yuan
  Journal of Nanomaterials.2020; 2020: 1.     CrossRef